|
Agatec MR240 Laser Detector
|
|
Agatec MR220 Laser Detector
|
Our Price: $595.00
Sale Price: $525.00
You Save $70.00
|
|
|
Our Price: $595.00
Sale Price: $525.00
You Save $70.00
|
|
|
|
|
|
The MR240 has built-in vertical indicator monitors angle of the stick, signaling if it's plumb or under- or over-extended.
|
The MR220 has a built-in vertical indicator monitors angle of the stick, signaling if it's plumb or under- or over-extended. Saves money by reducing over- or under-cuts. For optimal use of vertical indicator, the remote display with direction arrows for plumbing up the dipper stick is required.
Five LED indicators show the position of the bucket in relation to the laser beam. Arrows indicate if beam is high or low, allowing you to quickly reach reference plane. Magnet mount allows quick setup and easy movement from machine to machine. Clamp mount also available.
|
|
|
|
Agatec MR360
|
|
AGL MR240 Laser Detector
|
Our Price: $1,995.00
Sale Price: $1,250.00
You Save $745.00
|
|
|
Our Price: $595.00
Sale Price: $525.00
You Save $70.00
|
|
|
|
|
Built-in vertical indicator monitors angle of the stick, signaling if it's plumb or under- or over-extended. Saves money by reducing over- or under-cuts. For optimal use of vertical indicator, the remote display with direction arrows for plumbing up the dipper stick is required.
Five LED indicators show the position of the bucket in relation to the laser beam. Arrows indicate if beam is high or low, allowing you to quickly reach reference plane. Magnet mount allows quick setup and easy movement from machine to machine. Clamp mount also available.
|
Built-in vertical indicator monitors angle of the stick, signaling if it's plumb or under- or over-extended. Saves money by reducing over- or under-cuts. For optimal use of vertical indicator, the remote display with direction arrows for plumbing up the dipper stick is required.
Five LED indicators show the position of the bucket in relation to the laser beam. Arrows indicate if beam is high or low, allowing you to quickly reach reference plane. Magnet mount allows quick setup and easy movement from machine to machine. Clamp mount also available.
|
|
|
|
AGL MR220 Laser Detector
|
|
AGL EZ Dig180 Laser Detector
|
Our Price: $595.00
Sale Price: $525.00
You Save $70.00
|
|
|
Our Price: $1,295.00
Sale Price: $1,295.00
|
|
|
|
|
The MR220 has a built-in vertical indicator monitors angle of the stick, signaling if it's plumb or under- or over-extended. Saves money by reducing over- or under-cuts. For optimal use of vertical indicator, the remote display with direction arrows for plumbing up the dipper stick is required.
Five LED indicators show the position of the bucket in relation to the laser beam. Arrows indicate if beam is high or low, allowing you to quickly reach reference plane. Magnet mount allows quick setup and easy movement from machine to machine. Clamp mount also available.
|
The XLR 180 is a construction tough laser receiver specifically designed for the rigors of excavator work. It's patented magnetic mounting system allows the elevation to be precisely set after being attached to the dipper stick. (No extra brackets needed)
Construction tough. EZ-Height adjustment!
|
|
|
|
AGL MR360 Laser Detector
|
|
CST/Berger 57-LD120 Dual Sided Laser Detector with Clamp
|
Our Price: $1,995.00
Sale Price: $1,250.00
You Save $745.00
|
|
|
Our Price: $195.00
Sale Price: $149.99
You Save $45.01
|
|
|
|
|
Built-in vertical indicator monitors angle of the stick, signaling if it's plumb or under- or over-extended. Saves money by reducing over- or under-cuts. For optimal use of vertical indicator, the remote display with direction arrows for plumbing up the dipper stick is required.
Five LED indicators show the position of the bucket in relation to the laser beam. Arrows indicate if beam is high or low, allowing you to quickly reach reference plane. Magnet mount allows quick setup and easy movement from machine to machine. Clamp mount also available.
|
The CST/Berger LD120 Rotary Laser Detector allows the user to locate laser beams from rotary laser levels in bright light or long distances. This detector may be used with any invisible or red-beam visible rotary laser. Powered by one 9-volt batter, the LD120 can run up to 3 months on one batter. The LD120 features Dual LCD displays with power on/off, audio on/off and beam resolution controls.
|
|
|
|
CST/Berger 57-LD400G Green Beam Laser Detector with Clamp
|
|
CST/Berger 57-LD400 7-Channel Laser Detector with Clamp
|
Our Price: $295.00
Sale Price: $219.00
You Save $76.00
|
|
|
Our Price: $295.00
Sale Price: $159.00
You Save $136.00
|
|
|
|
|
|
The CST/Berger LD400G Green Beam Laser Dectector aids in locating and targeting lines emitted by Green Beam Rotary Laser Levels. Perfect for use in both indoor and outdoor applications where lighting conditions make it hard to see the visible beams. PLEASE NOTE: This detector will NOT work with Red Beam rotary laser levels.
|
The CST/Berger LD400YEL 7-Channel Rotary Laser Detector allows the user to locate laser beams from rotary laser levels in bright light or long distances. This detector may be used with any invisible or red-beam visible rotary laser. Powered by one 9-volt batter, the LD400YEL can run up to 3 months on one batter. The LD400YEL features Dual 7-Channel LCD displays with power on/off, audio Hi/Med/off and Three Level beam resolution controls.
|
|
|
|
CST - LaserMark 58-LD-500 Universal Laser Reciever
|
|
CST/Berger 58-LGA Rotary Laser Level Manual Grade Adapter
|
Our Price: $600.00
Sale Price: $429.99
You Save $170.01
|
|
|
Our Price: $89.00
Sale Price: $79.99
You Save $9.01
|
|
|
|
|
|
CST - LaserMark's LD-500 is a versatile and durable dual use laser detector for the construction site. The LD-500 Universal Laser Receiver is both and machine-mounted and level rod receiver designed for all brands of rotary lasers. Its 5" receiving photo cell and 240 degree reception makes it perfect for use with a standard level rod or for use with backhoes, excavators, dozers, skid steers, and box blades. Additionally, the LD-500 includes built-in magnetic mounts for use with machines.
|
The CST/Berger 58-LGA Laser Grade Adapter provides laser users with the ability to dial in a grade when using their standard non-grade laser level. Just turn put the laser in manual mode, position on the 58-LGA Laser Grade Adapter and dial in your desired grade to the nearest degree and BAM, you have a grade laser. Grade vernier allows for grade accuracy of +/-10 minutes. Includes circular level vial and standard 5/8x11 mounting thread. Compatible with most lasers using a 5/8x11 mounting thread. Precision machined components ensure that the 58-LGA Laser Grade Adapter will provide years of loyal service.
|
|
|
|
CST/Berger 58-LLD20 Pulsing Laser Line Detector
|
|
David White - LD50N Universal Laser Reciever
|
Our Price: $199.00
Sale Price: $175.00
You Save $24.00
|
|
|
Our Price: $600.00
Sale Price: $429.99
You Save $170.01
|
|
|
|
|
|
The CST/Berger LLD20 Laser Line Detector for Pulsing Beam Lasers aids in locating and targeting visible or invisible beams emitted by Pulsed Laser Levels. Perfect for use in both indoor and outdoor applications where lighting conditions make it hard to see the visible beams. PLEASE NOTE: This detector will NOT work with any rotary laser levels.
|
The David White LD-50N is a versatile and durable laser detector for the construction site. The DW-LD50N Universal Laser Receiver is a machine-mounted receiver designed for all brands of rotary lasers. Its 5" receiving photo cell and 240 degree reception makes it perfect for use with backhoes, excavators, dozers, skid steers, and box blades. Additionally, the DW-LD50N includes built-in magnetic mounts for use with machines.
|
|
|
|
ProShot Bullseye 3 (Machine Control) Laser Detector
|
|
|
Our Price: $1,445.00
Sale Price: $1,150.00
You Save $295.00
|
|
|
|
The Bullseye is a 360 degree laser detector designed to mount on a dozer blade or on the stick of an excavator. The highly visible LED display provides 5 channels of information, high, high fine, on grade, low fine, and low. It allows grade checking from the operator’s seat and eliminates the need for another person to stay with the machine as a grade checker.
Grade staking cost is greatly reduced or eliminated and productivity is greatly increased. The receiver can provide up to a 2000’ working range depending on the laser transmitter used. The Bullseye can be mounted on 1.66" to 2.0" O.D. round tube, or 1 1/2" square tube. The user can adjust the brightness of the display and the width of the on grade deadband.
|
|
|
